IC693MDL931 | IC693MDL931D

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693MDL931 | IC693MDL931D

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: 8 Amp Soldered InRelay Output
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693MDL931 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Table 7-17. Specifications for IC693MDL931 Rated Voltage 24 volts DC, 120/240 volts AC, 50/60 Hz (nominal – see the following table for exceptions) Output Voltage Range 5 to 30 volts DC 5 to 250 volts AC, 50/60 Hz Outputs per Module 8 isolated outputs Isolation 1500 volts between field side and logic side 500 volts between groups Maximum Load 8 amps resistive maximum per output 20 amps maximum per module for UL installations Minimum Load 10 mA Inrush Current 8 amps maximum for one cycle On Response Time 15 ms maximum Off Response Time 15 ms maximum Output Leakage Current 1 mA maximum at 250 volts AC, (25C (77F)) Internal Power Consumption 45 mA (all outputs on) from 5 volt bus on backplane 100 mA (all outputs on) from relay 24V bus on backplane Maximum load current is dependent upon ambient temperature as shown in graph on following page. Refer to Appendix B for product standards and general specifications.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248