A 12-pin connector, located on the module’s front panel,
allows the user to connect the optional IC693ACC760
Solenoid Forcing Pendent, described later.
The five 24VDC outputs can each drive up to a maximum
0.5A, with a limit of 2.0A total for all five points. Field
wiring is connected to these outputs via a 10-pin
connector located on the front panel. The user must
provide 24VDC to this connector to power the positive
logic outputs, which source current to the field
connections. This group of five discrete outputs is
electrically isolated from the PLC backplane; however,
the outputs are not individually isolated from each other.
Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248
Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248