IC693MAR590 | IC693MAR590C

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC


IC693MAR590 | IC693MAR590C

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 8 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: 120Vac Input Relay Output
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693MAR590 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Subject Description Ethernet Disconnect During Word for Word Change If the Ethernet connection is broken during a word-for-word change, the programmer may not allow a subsequent word-for-word change after reconnecting due to the fact that it thinks another programmer is currently attached. If this occurs, you should go offline and then back online again. Simultaneous Clears, Loads and Stores Not Supported Currently, PACSystems CPUs do not support multiple programmers changing CPU contents at the same time. The programming software may generate an error during the operation. Power Cycle During Online Edit If the user stores a folder to flash that is configured to power up from flash and then subsequently power is cycled in the middle of a Online Edit session, the programmer will still indicate that the Online Edit session is in progress after the power cycle. The user should cancel the Online Edit session to continue. Power Cycle During Write to Flash If the CPU is power cycled during the process of writing to flash, and is configured to power up from flash, a fault will be generated on power up.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248