IC693CPU341 | IC693CPU341A

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693CPU341 | IC693CPU341A

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 8 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Processor 80K Bytes User Memory 10K Registers
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU341 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -BB, -CC, -CD, -CE, -DE,

Product Manual Excerpt

This section contains information on installing the I/O Processor module and information relevant to field wiring to and from the module. Warning Do not insert or remove modules with power applied. This could cause damage to the module, or result in personal injury. Removing module with power applied could cause the PLC to Stop. Installation and Removal of I/O Modules The following procedures and recommendations should be followed when installing and removing Series 90-30 I/O modules. Inserting a Module Use the following instructions as a guide when inserting a module into its slot in a baseplate. 1. Make sure that power to the PLC is turned off. 2. Select the slot into which the module is to be inserted. Grasp the module firmly with terminal board toward you and with rear hook facing away from you. 3. Align module with desired base slot and connector. Tilt module upward so that top rear hook of module engages slot on baseplate (Figure 2-1). 4. Swing module downward until connectors mate and lock-lever on bottom of module snaps into place engaging the baseplate notch. 5. Visually inspect the module to be sure that it is properly seated. a43055 Figure 2-1. Inserting a Series 90-30 Module 2 2-2 GFK-1028 Series 90-30 I/O Processor Module User’s Manual - June 1994 Warning Voltages from user devices can be present on a module’s screw terminals even though power to the rack is turned off. Care must be taken any time you are handling the module’s removable terminal board or any wires connected to it.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248