IC693CPU323 | IC693CPU323T

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693CPU323 | IC693CPU323T

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc 10-Slot Rack With Turbo CPU in base 12K bytes User
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU323 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AE,

Product Manual Excerpt

Firmware Upgrade Kits Those wishing to upgrade earlier versions of these CPU modules to version 8.40 may purchase the appropriate upgrade kit. Select the upgrade kit catalog number that corresponds to your CPU from the following table. Before upgrading firmware, read the “If Upgrading Firmware” note in the “Operational Notes” section of this document. CPU Model Upgrade Kit Catalog Number IC693CPU311 44A731233-G16 IC693CPU313 44A731249-G12 IC693CPU323 44A735538-G12 IC693CPU331 44A731232-G16 IC693CPU341 44A731240-G13 Important Product Information 3 GFK-0702AC Operational Notes If Upgrading Firmware The user program, configuration, CPU ID (used for SNP communication), and status tables will automatically be cleared when the CPU firmware EPROM is changed. So you will need to restore these after performing a firmware upgrade. The user program, configuration, and status tables can be restored from a program folder, from memory card, or EEPROM. The SNP ID must be set separately using the MS-DOS PLC programming software, VersaPro software, or the Hand-Held Programmer.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248