IC693CPU323 | IC693CPU323S

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC


IC693CPU323 | IC693CPU323S

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc 10-Slot Rack With Turbo CPU in base 12K bytes User
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU323 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AE,

Product Manual Excerpt

Problems Resolved by This Firmware Release (8.40) Time-of Day (TOD) Clock Start-up Problem on CPU331 and CPU341 In some cases, if the backup battery was disconnected after the CPU was powered down, the TOD clock would not restart when the PLC was powered back up. This would result in a fatal fault being logged that identified the failure of the TOD clock. Subsequent cycling of power would not cause the clock to restart. It could be restarted, however, by removing the CPU and shorting the “super capacitor” memory backup capacitor. This problem has been corrected in firmware release 8.40. (Note that CPUs 311, 313, and 323 do not have a TOD clock.) Users with earlier versions of CPU331 or CPU341 who experience this problem are advised to upgrade these CPUs to firmware release 8.40 (see the heading “Firmware Upgrade Kits”). Problems Resolved by Prior Firmware Release 8.21 FBC Editing with Hand Held Programmer (HHP) A soft alarm fault could occur in release 8.20 when editing an FBC configuration with a hand held programmer. This problem has been corrected in release 8.21. Storing Foreign Module Configuration to Slot 1 Storing a configuration with a foreign module in slot 1 (possible only on 311, 313, or 323) would result in a fatal fault in release 8.20. This has been corrected in release 8.21. End Function Block The End Function Block no longer terminates a sweep if it is in a subroutine. It merely exits the subroutine. This restores the functionality as it was prior to release 8. SVC REQ7 SVC REQ 7 previously would allow an invalid date, such as 2/29/01 to be entered. Dates with a day number greater than is legal for the specified month is no longer allowed as input to SVC REQ 7.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248