IC693CPU313 | IC693CPU313O

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC


IC693CPU313 | IC693CPU313O

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 4 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 5 Slot Rack with Turbo CPU in base 1k Registers
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU313 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AE,

Product Manual Excerpt

Configuration Using the Hand-held Programmer When the I/O Processor Module is installed, configuration data entered by the user, in response to the Hand-held Programmer screens, is stored in the configuration memory area of the PLC. When configuration is complete, the PLC sends this configuration data to the I/O Processor Module. Hand-held Programmer Configuration Screens The screens encountered when configuring the I/O Processor are described below. If the value input by the user is not an acceptable value for that configuration parameter, the I/O Processor will reject the data and respond with an error message . Error messages are described in the Hand-held Programmer User ’s Manual. PLC I/O Scanner Configuration Before the PLC allows the I/O Processor configuration screens to be viewed, it presents the following I/O Scanner Configuration screens. %I Address R0:04 IOP 1.xx

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248