IC693CPU313 | IC693CPU313L

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC


IC693CPU313 | IC693CPU313L

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 4 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 5 Slot Rack with Turbo CPU in base 1k Registers
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU313 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AE,

Product Manual Excerpt

Inputs Not Used by Encoders Any of the IOP faceplate inputs 9–12 not required by an encoder can be used as strobe/timer inputs. The Input 9–12 faceplate terminals are also shared with outputs 5–8. Module configuration determines whether the terminals are used as inputs or outputs. 1 1-6 GFK-1028 Series 90-30 I/O Processor User’s Manual - June 1994 Range Comparator Function The IOP contains 32 range comparators which are analogous to a camshaft with 32 lobes for generating outputs. The position and duration of each range comparator output is programmable. The general operation of range comparators is shown in Figure 1-2. T1 ON OFF T2 OUTPUT ON PRESET OFF PRESET TIMER 1 TIMER 2 Q (enable h/w out) a45372 GRAY CODE CONVERSION OR UP/DOWN COUNTER ENCODER H/W INPUTS Figure 1-2. Range Comparator Block Diagram In the table below, and in the discussion that follows, the 32 range comparators are grouped according to their output function. Range comparators 1–8 control eight %I status bits and eight hardware outputs, range comparators 9–16 control eight %I status bits, and range comparators 17–32 control a 16-bit %AI data word. Range Comparator Operation Summary Range Comparators Modes Update Rate Hardware Output 1–4 Preset Timer 0.5ms always (also output to %I table) 5–8 Preset Timer 0.5ms configurable (also output to %I table) 9–16 Preset 4ms no (output to %I table) 17–32 Preset 4ms no (output to %AI table) 1 1-7 GFK-1028 Chapter 1 Introduction Range Comparators 1–8 Range comparators 1–8 control eight hardware outputs every 500 μ s using one ON preset, one OFF preset and two pulse timers (TIMER1, TIMER2) per output. Range comparator faceplate outputs 1–4 are always available. The four faceplate hardware output terminals used by range comparators 5–8 are shared by input points 9–12. A %Q bit is provided as an output enable for each configured hardware output.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248