IC693CPU311 | IC693CPU311W

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693CPU311 | IC693CPU311W

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 7 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 5-Slot Rack With CPU in base
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU311 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AD, -AE,

Product Manual Excerpt

Figure 3-4. IOP Configuration Screen 4 (Function = ABS or AQUADB Encoder) This parameter specifies the count input value that causes the output to turn ON. The value can be anything within the count range. Default: Maximum encoder value for Absolute Encoders, 255 for AQUADB mode This parameter specifies the count input value that causes the output to turn OFF. The value can be anything within the count range. Default: 0 Note These parameters are repeated for outputs 10–16 on this screen. The remaining two screens provide entry of these same parameters for outputs 17–24 and 25–32. ON Preset OFF Preset 4 Chapter 4-1 GFK-1028 Automatic Data Transfers Data transferred automatically during each sweep between the CPU and IOP, without user programming, consists of discrete status bits (%I), status data words (%AI), discrete command bits (%Q), and immediate command data (%AQ). The size and direction flow of this data is listed below. Input Status Data (From IOP to CPU) D Status Bits: 32 bits of %I data D Status Words: 15 words of %AI data Output Command Data (From CPU to IOP) D Discrete Commands: 32 bits of %Q data D Immediate Command Data: 6 words of %AQ data %I Status Bits The following %I Status Bits are transferred automatically from the IOP to the CPU during each sweep. The actual addresses of the Status Bits depend on the starting address configured for the %I references (see Section 3 for these configuration details). The bit numbers listed in the following table are offsets from this %I reference address.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248