IC693CPU311 | IC693CPU311-AC

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693CPU311 | IC693CPU311-AC

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 7 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 5-Slot Rack With CPU in base
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CPU311 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -AA, -AB, -AC, -AD, -AE,

Product Manual Excerpt

A Appendix A-1 GFK-1028 I/O Processor Error Codes Error codes reported by the IOP module are returned in the Module Status code (first %AI word). When an error is returned, the %I error (bit 32) is set. When the error condition has been acknowledged, the error bit must cleared by sending the Clear Error command (%Q bit 32). Errors returned are defined as follows. Error Code Description 0010 Encoder Position Offset out of range* xx11 ♦ ON Preset out of range xx12 ♦ OFF Preset out of range 0015 Home Position out of range • 0016 Preload Position out of range • 001E AQUADB Input Quadrature error • ♦ xx = Output Preset Number * ABS Encoder Function only • AQUADB Function only B Appendix B-1 GFK-1028 I/O Processor Module Specifications Module Specifications Operating Temperature 0 ° C to 60 ° C (Inlet) Storage Temperature: –40 ° C to +85 ° C Humidity 5% to 95% (non-condensing) Shock and Vibration: IEC 68-2-6 (1982), JISC0911 (1984) Power Supply Voltage: 5 VDC from backplane Power Supply Current: 360 mA + (10mA x number of ON faceplate outputs) Field I/O to logic isolation Peak (1 second): Steady State: 1500 V 30V AC/DC Maximum # modules/PLC system: Model 311, 313, 321, 323: Model 331: Model 341: 4 (limited by %AI data) 8 total in CPU, expansion and remote baseplates (limited by %AI data) 14 total in CPU, expansion and remote baseplates (limited by CPU configuration memory; presence of other modules such as APM, HSC, and GCM reduces number of allowed IOP modules) B B-2 GFK-1028 Series 90-30 I/O Processor User’s Manual - June 1994 I/O Processor Module Inputs/Outputs Inputs Input Type Positive Logic, optically isolated Note: Input Common is internally connected to Out- put Common Input Circuit Power Supplied by module using DC/DC converter Encoder Power Supplied by user (5V or 10–30V DC) (Inputs will operate with Output Circuit power dis- connected) Input Impedance 4300 ohms typical Input Threshold 8.0v (non–TTL), 1.5V (TTL) Input Hysteresis 250 mV typical Maximum Input Voltage +30 VDC Input duty cycle limit above 40 ° C If Input 1–12 voltages exceed 24.0V, derate total input duty cycle from 100% at 40 ° C to 50% at 60 ° C Input filter delays Absolute Encoder AQUADB Encoder & Preload AQUADB Home Switch AQUADB IN6–8 20 μ s 20 μ s / 2 μ s selectable 10 ms 10 ms Minimum Strobe Input pulse width 2 ms Maximum Count Rate 30 khz (Absolute Encoder) 200 khz (A Quad B Encoder) Input Cable Shielded cable recommended Maximum length: 30m OPTOCOUPLER a45376 13 OUTCOM INCOM 20 REF VOLTAGE 3.3K 1K 33V IN Figure B-1. Simplified Input Circuit Diagram (Inputs 1–8) B GFK-1028 B-3 Appendix B I/O Processor Module Specifications Outputs Output type Positive Logic, optically isolated Maximum Supply Voltage 30.0 VDC Continuous Output Current (10–30 VDC supply) 1.0 A (each output 1–4) 0.5 A (each output 5–8) Total Continuous Output Current at 40 ° C 4.0 A (total of outputs 1–8) Output 1–4 derating above 40 ° C Derate total Output 1–4 current to 2.0A at 60 ° C Output 5–8 derating above 40 ° C Derate total Output 5–8 current to 0.5A at 60 ° C Output current using 5 VDC supply 20 mA typical with 5.0 VDC supply 2 mA minimum with 4.9 VDC supply Inductive Load Clamp Voltage –8.0 V typical (outputs 1–4) –1.0 V typical (outputs 5–8) OFF state leakage current 10 μΑ (each output) Output Fuse 5 A (5x20mm replaceable) common to all outputs Output Response Time

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248