IC693CMM321 | IC693CMM321-GH

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693CMM321 | IC693CMM321-GH

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Modbus EGD Ethernet Interface TCP/IP Module
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CMM321 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z, -KN, -KM, -KL, -JL, -JK, -HJ, -GH, -FG, -EF, -EE, -DD, -CD, -CC, -BA,

Product Manual Excerpt

IC693CMM321-GH, with FW version 3.10, Adds MODBUS/TCP COMMREQ operations for Master and Slave; Corrects problem with interruption of Ethernet transmission March 3, 2003 GFK-1085P I MPORTANT P RODUCT I NFORMATION READ THIS INFORMATION FIRST Product: Factory LAN TCP/IP Ethernet Interface Module for IC693 PLC IC693CMM321-GH with Firmware Release 3.10 Introduction This document contains information about this product that is not available in any other publication; therefore, we suggest you read it, then save it with your other PLC documentation. General Description This release consists of a firmware and hardware update for the IC693CMM321 Ethernet Interface Module. The hardware update addresses a condition in some IC693CMM321-FG modules that can cause them to stop Ethernet transmission for a period of time and then return to normal operation. Any IC693CMM321-FG module that exhibits this behavior should be returned for update (the hardware is not field-updateable). Firmware Release 3.10 adds MODBUS®/TCP Master and Slave functionality to CMM321 modules with catalog numbers IC693CMM321-Fx. Firmware releases numbered 3.00 and greater apply only to revision Fx modules or later. This firmware cannot be loaded into a IC693CMM321-Ax, -Bx, -Cx, -Dx, or –Ex. Users of the IC693CMM321-EF and earlier modules can update by replacing their older Ethernet Interface module with an IC693CMM321-Fx or –Gx module. This module provides network communications using the SRTP (Service Request Transfer Protocol) over standard TCP/IP (Transmission Control Protocol / Internet Protocol) on an Ethernet Local Area Network (LAN). The Ethernet Interface supports communication between IC693 PLCs, IC697 PLCs, and/or IC200 PLCs equipped with TCP/IP Ethernet Interfaces. It can communicate with the various Windows-based PLC software products and the TCP/IP version of the DOS-based software. Hardware Identification for IC693CMM321-GH EM3A2-44A751166-G01 R02 Software Identification for IC693CMM321-GH • Software Loader: Version 3.00 (not updated in this release) • TCP/IP: Version 3.10 Replaces Module Versions: IC693CMM321- FG Firmware Field Update Kit 44A751570-G01 Note that this hardware requires the use of a Station Manager cable (IC693CBL316) to update firmware. Hardware Compatibility EM3A2-44A751166-G01 R00 or later versions ® MODBUS is a registered trademark of Schneider Automation, Inc. 2 Important Product Information GFK-1085P Functional Compatibility Release 3.10 of the IC693CMM321 is compatible with these products: • IC693 PLC CPU firmware version 6.50 or later; restricted operation with CPU firmware 5.03 (6.03 for Model 351 CPU). See the section “Additional Restrictions With CPU Firmware Earlier Than Version 6.50.” • PLC Logic Developer version 2.11 or later. • VersaPro version 1.01 or later. Version 2.02 or later is required to store hardware configurations that contain module initialization files larger than 32,768 bytes. • Windows ® -based programming software, version 2.01 or later. • The MS-DOS -based programming software IC693 version 6.01 or later. • The MS-DOS-based programming software IC693 TCP/IP Ethernet version 7.01 or later. Documentation TCP/IP Ethernet Communications User’s Manual , version B TCP/IP Ethernet Communications Station Manager Manua l, version G Version Identification There are currently two different designs of IC693CMM321 modules. See the previous Important Product Information for IC693CMM321-FG for feature comparison of the two module types. Version* Description IC693CMM31-EF and earlier versions AAUI-only type IC693CMM321-FG and later versions 10Base-T type * The module’s version is indicated by the two letters at the end of the product catalog number. For example, in the catalog number IC693CMM321-AA, the version is indicated by AA

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248