IC693CMM311 | IC693CMM311F

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC


IC693CMM311 | IC693CMM311F

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 6 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Communications Card CCM RTU SNP and SNPx Protocols
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693CMM311 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

F 3.4 Oct-93 GFK-0561l SNP-X Protocol support added Read Q-Response to Source Register CCM COMREQ added Special 2-wire CCM RS-485 operation added Programmable receiver-enable delay added for CCM 2-wire operation Invalid point formats in SNP datagram may result in PLC failure An SNP datagram is limited to 250 bytes Establish Datagram COMREQ must specify correct slave PLC type Incorrect Autodial error code SNP Read or Write incorrect for bit data Large Modem Turn-around Time causes Inactivity Timeout at SNP slave SNP COMREQ delayed for 20 sec Excessive SNP retries with certain modems SNP slave may reject Change PrivLevel SNP service SNP timeout after Set PLC Date/Time COMREQ SNP Break, T4 times not adjusted by Long Attach COMREQ Partial CCM Q/N ENQuiry CMM version cleared in CCM DSW CCM slave hang up PLC reference table access by CCM Multidrop CCM ENQuiry retransmission CCM Target ID check incompatible with earlier versions CCM COMREQ fails with %AI or %AQ Status Word CCM slave may begin to EOT all incoming headers PLC reference table access by RTU

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248