For typical industrial applications, all expansion and remote baseplate cables can be
made with plastic shell covers and should be wired as shown in Figure 10-19. In either
case, pin 1 should be wired into both ends of the custom length cable and the
recommendations listed below should be followed for the Wye cables treatment in the
remote (IC693CHS392/399) baseplates.
When using 100% shielded cables all local (CPU and expansion) baseplates in the system
must be solidly referenced to the same ground point or a potential difference between
baseplates could disturb signal transmission.
Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248
Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248