IC693APU302 | IC693APU302N

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693APU302 | IC693APU302N

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 6 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Axis Positioning Module
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693APU302 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Select Return Data Command Enhancement The Select Return Data command has been enhanced to add an additional mode to support accessing the serial encoder absolute position reported for Power Mate J systems (only). An additional restriction is that the software End of Travel limits must be enabled by setting Pos EOT or Neg EOT less than the corresponding Hi Count Limit or Low Count Limit . The added reporting is accessed as follows: Selected Return Data : Serial encoder absolute position Data Mode: 06h Data Offset: not used 1 Millisecond Strobe Update The strobe update latency has been improved from 2 milliseconds to 1 millisecond, offering greater accuracy in the reported Strobe Position . A 2 millisecond update rate is still used for conditional jump testing and position loop update in the 2 axis APM

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248