IC693APU302 | IC693APU302D

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693APU302 | IC693APU302D

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 6 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Axis Positioning Module
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693APU302 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Firmware Upgrade Kit A firmware upgrade kit, 44A731242-G08 (firmware version 2.80) is available to upgrade the modules listed above to firmware version 2.80. This update is an optional release. There will normally be a charge for an upgrade to firmware version 2.80. Contact the PLC Hotline for more information if you have encountered one of the problems listed in Problems Resolved. Note: Digital servo control using the Motion Mate MCM001 Digital Servo Interface module is only allowed with Motion Mate APM300 hardware revision R11 and later. Applicable Documents 1. GFK-0840D, Power Mate APM for Series 90 ™ -30 PLC Standard Mode User’s Manual. 2. GFK-0781C, Power Mate APM for Series 90 ™ -30 PLC Follower Mode User’s Manual. 3. GFK-1256, Power Mate J for Series 90-30 4. GFK-0664A, PLC Axis Positioning Module (APM) Programmer’s Manual . Important Product Information 3 GFK-1317G Special Operational Notes CPU Firmware Use of APM300 firmware version 2.80 requires that version 3.52 or higher of the IC693 CPU firmware be installed in the CPU module.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248