IC693APU300 | IC693APU300I

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693APU300 | IC693APU300I

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 4 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 High Speed Counter
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693APU300 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Restrictions and Open Issues Subject Description Outputs may fail when user supplied field power is more than 30Vdc With IC693APU300 - Mx, when the user supplied field power exceeds 30V dc then the outputs may fail. In boot firmware mode the module logs Loss of IO module faults continuously. During indirect firmware update process, should the operation be disrupted (for example by a power cycle or the serial cable is disconnected) the module will enter boot firmware mode (S1 and S2 LEDs blink in unison continuously). If hardware configuration is downloaded from Proficy Machine Edition at this point and the module is configured as Enhanced mode, the IO Fault table is flooded with Loss of IO Module faults. To correct this problem, clear the hardware configuration from CPU before restarting the fi rmware update process. When ever IC693APU300 - MA or later is installed in a 90 - 30 system, a Loss of I/O Module fault may occur when the CPU goes into RUN mode. A Loss of I/O Module fault may occur in a Series 90 - 30 system having IC693CPU331 with the IC693AP U300 Cx and later module. This issue is not observed with latest released IC693CPU331 revision. High - Speed Counter Module 9 GFK - 2602 B

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248