IC693ALG390 | IC693ALG390F

GE-IP | 9030 | GE Fanuc 90-30 GE-IP PLC

product-image

IC693ALG390 | IC693ALG390F

  • Availability: In StockShips Today!
  • Units in Stock: Immediate Availablity: 5 Units!
  • Call for best Pricing+ 1 919 680 1773
  • Manufacturer: GE-IP
  • Description: GE Fanuc Series 90-30 Analog Output Voltage only, 2 Channels
  • Weight: 1 lbs :: ≈ 1 kgs
  • Warranty: 1 Years
  • Product Revisions Available:
  • Other Available Revisions of the IC693ALG390 : A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z,

Product Manual Excerpt

Power on the DVM and the 9030 PLC. Allow the Analog module a minimum warm-up period of 5 minutes. Hook up the HHP or PC to the 9030 PLC. Go to the assigned reference address of this module in the data tables and set the output of channel 1 to +Full Scale (7D00H). 6. Verify the accuracy of channel 1 for the following results: Calibration Verification STATE OUTPUT ACTUAL ERROR + FS 7D00H + 10.0000 V +/- 5.0 mV 0 V 0000H 0.0000 V +/- 5.0 mV - FS 8300H - 10.0000 V +/- 5.0 mV FS = Full Scale 7. If channel 1 is out of specifications then set the module at +FS output and then adjust P1 for a reading of +10.0025 V +/- 0.5 mV. 8. 9. If P1 was adjusted then repeat step 7.

Warning: include_once(/js/tracking.php): failed to open stream: No such file or directory in /var/www/series/revision.php on line 248 Warning: include_once(): Failed opening '/js/tracking.php' for inclusion (include_path='.:/usr/share/php:/usr/share/pear') in /var/www/series/revision.php on line 248